You are an unregistered user, you can register here
Navigation

Information

Site

Donations
If you wish to make a donation you can by clicking the image below.


BeyondUnreal News

 
Go Back   The Unreal Admins Page > Forums > Hosted Forums > UTPure > UTPure - Client Side Hack Protection > UTPure FAQ

Reply
Thread Tools Display Modes
  #1  
Unread 12th November, 2003, 06:23 PM
just**me<{VDS}>
 
Posts: n/a
Default

Pure console commands: (only available as PLAYER)

MutateTalk (same as Mutate <string> )
AdminTalk (same as Admin <string> )

CheatInfo (same as Mutate CheatInfo)

FixTeams (same as Mutate FixTeams)
NextTeam (same as Mutate NextTeam)
ChangeTeam <x> (same as Mutate ChangeTeam <x>)

ShowNetspeeds (same as Mutate PureShowNetspeeds)
ShowIPs (same as Mutate PureShowIPs)
ShowTickrate (same as Mutate PureShowTickrate)

SetMaxClientError <x> Sets how much difference the server allows in Server/Client position before an forced update is sent to client. Default value is 3. Max value is Decided by server, usually 100. Setting this to a value higher than 3, will possibly worsen your aim, but for a person on a Modem, it might help cutting down on traffic.

Mutate Commands: (Mutate <Command> ) (Mutate commands also work when you are a spectator)

CheatInfo - Shows Pure Info

FixTeams - Evens teams (if enabled)
NextTeam - Moves you to next team (if enabled)
ChangeTeam <x> - Moves you to team <x> (if enabled)

PureShowIPs - Shows IP of players (if you are admin)
PureShowTickrate - Shows the configured Tickrate of the server
PureShowNetspeeds - Shows the Netspeed of the players on the server

ShowIDs - Shows ID of the players on the server (if you are admin)
KickID <x> - Kicks player with ID of <x> from server (if admin)
BanID <x> - Bans player with ID of <x> from server (if admin)

EnableHitSounds - Turns Hit Sounds on (if admin) (RC53+)
DisableHitSounds - Turns Hit Sounds off (if admin) (RC53+)

EnablePure - Enables Pure (if admin)
DisablePure - Disables Pure (if admin)
EnablePure/DisablePure requires a map restart to take effect.
Disabling Pure can be used to allow mods like Rocket Arena and Excessive, while still keeping the utils UTPure provides. (TeamStuff, ClickBoard, PureShow stuff and so on)
When UTPure is Disabled, the majority of the commands will still work. The server will just not be protected anymore.
Reply With Quote
  #2  
Unread 24th May, 2004, 05:44 AM
Just**Me
 
Posts: n/a
Default

As posted by TNSe. 05-20-04

Pure console commands: (only available as PLAYER)

MutateTalk (same as Mutate <string> )
AdminTalk (same as Admin <string> )

CheatInfo (same as Mutate CheatInfo)

FixTeams (same as Mutate FixTeams)
NextTeam (same as Mutate NextTeam)
ChangeTeam <x> (same as Mutate ChangeTeam <x>)

ShowNetspeeds (same as Mutate PureShowNetspeeds)
ShowIPs (same as Mutate PureShowIPs)
ShowTickrate (same as Mutate PureShowTickrate)

SetMaxClientError <x> Sets how much difference the server allows in Server/Client position before an forced update is sent to client. Default value is 3. Max value is Decided by server, usually 100. Setting this to a value higher than 3, will possibly worsen your aim, but for a person on a Modem, it might help cutting down on traffic.

Mutate Commands: (Mutate <Command> ) (Mutate commands also work when you are a spectator)

CheatInfo - Shows Pure Info

FixTeams - Evens teams (if enabled)
NextTeam - Moves you to next team (if enabled)
ChangeTeam <x> - Moves you to team <x> (if enabled)

PureShowIPs - Shows IP of players (if you are admin)
PureShowTickrate - Shows the configured Tickrate of the server
PureShowNetspeeds - Shows the Netspeed of the players on the server

ShowIDs - Shows ID of the players on the server (if you are admin)
KickID <x> - Kicks player with ID of <x> from server (if admin)
BanID <x> - Bans player with ID of <x> from server (if admin)

EnableHitSounds - Turns Hit Sounds on (if admin) (RC53+)
DisableHitSounds - Turns Hit Sounds off (if admin) (RC53+)

EnablePure - Enables Pure (if admin)
DisablePure - Disables Pure (if admin)
EnablePure/DisablePure requires a map restart to take effect.
Disabling Pure can be used to allow mods like Rocket Arena and Excessive, while still keeping the utils UTPure provides. (TeamStuff, ClickBoard, PureShow stuff and so on)
When UTPure is Disabled, the majority of the commands will still work. The server will just not be protected anymore.
Reply With Quote
  #3  
Unread 27th July, 2004, 12:16 PM
[ZSZ]Evil_Dragon's Avatar
[ZSZ]Evil_Dragon [ZSZ]Evil_Dragon is offline
Holy Shit!!
 
Join Date: Jul 2004
Location: Germany
Posts: 659
Default

I just installed UTPureRC7C and to see all those possible player commands unsure me.

Does this mean a player change any of my server settings?
MutateTalk (same as Mutate <string> )
AdminTalk (same as Admin <string> )

CheatInfo (same as Mutate CheatInfo)

FixTeams (same as Mutate FixTeams)
NextTeam (same as Mutate NextTeam)
ChangeTeam <x> (same as Mutate ChangeTeam <x>)


And how do I enable or disable this:
FixTeams - Evens teams (if enabled)
NextTeam - Moves you to next team (if enabled)
ChangeTeam <x> - Moves you to team <x> (if enabled)

Thanks if anyone is willing to help a newbie
Reply With Quote
  #4  
Unread 12th July, 2005, 09:40 PM
CPanoplyd CPanoplyd is offline
Holy Shit!!
 
Join Date: Feb 2005
Posts: 732
Default

I just looked and the Admin list only shows when I'm logged in as admin.

Now for my question. Would it be possible to get a PURE command for setting bUseClickboard to be changed with a mutate command??

We are running a 2v2 Clan Tournament amongst our members and we are using clickboard for the tournament but not for regular game play.

If there is a command already in place, could someone please post it for me.....I'm a little bit mutate command dumb! LMAO
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:17 PM.


 

All pages are copyright The Unreal Admins Page.
You may not copy any pages without our express permission.